Isuzu D-MAX Lift Kits

Select your size:

2 Inch Lift Kits | 3 Inch Lift Kits | 4 Inch Lift Kits

Isuzu D-MAX and MU-X lift kits for 2012–2020 and 2020-on models, in 2 and 3 inch heights. Springs and shocks matched for towing, touring and bigger tyres, from CalOffroad, Bilstein and Fox.

 

Sort by

10 of 10 items

About our Isuzu D-MAX & MU-X Lift Kits

Our Isuzu D-MAX lift kits and MU-X lift kits are built for one generation each, because the struts, springs and mounting points changed when the new models arrived:

  • D-MAX 2012 to mid 2020: 2 and 3 inch kits from CalOffroad Platinum, a Bilstein-based 3 inch kit and Fox
  • D-MAX mid 2020 on: 2 and 3 inch CalOffroad Platinum kits and a 2–3 inch Bilstein-based kit
  • MU-X 2011 on and 2020 on: 45mm and 2 inch CalOffroad Nitro Pro kits

Each D-MAX kit pairs front struts with rear leaf springs and shocks rated for your load, so the lift holds its height with a canopy, drawers, a fridge and water on board.

2 inch or 3 inch: which D-MAX lift is right for you?

A 2 inch D-MAX lift kit is the most popular choice for touring and towing. It adds clearance and room for slightly bigger tyres while keeping the factory front geometry working as designed.

An Isuzu D-MAX 3 inch lift kit suits owners running bigger tyres or tackling harder tracks. At that height, plan for two supporting parts:

Most states allow around 50mm of suspension lift without engineering approval, so a 3 inch (75mm) lift usually needs certification. Check your state's rules before you buy.

Isuzu MU-X lift kits

The MU-X shares its front end with the D-MAX but has coil springs at the rear instead of leaf springs, so it needs its own kit. Our MU-X kits pair front struts with rear coils and shocks matched to a loaded family tourer. Choose the 45mm kit for the 2011–2020 MU-X or the 2 inch kit for the 2020-on model.

D-MAX kits that also fit Mazda and Holden

The mid 2020-on D-MAX and the Mazda BT-50 Gen 3 share the same platform, and several 2012–2020 D-MAX kits also fit the Holden Colorado (2011–2016). Check the fitment list on each kit to confirm.

More lift kit options from CalOffroad

More suspension parts for Isuzu

Isuzu D-MAX Lift Kit FAQs

Will a 2020-on D-MAX lift kit fit my older D-MAX?

No. The D-MAX changed generation in mid 2020, and the struts, springs and mounts are different between the two. Check your build plate for the build date, then choose a kit listed for your model. If your D-MAX was built around the changeover, call us on 1300 225 494 and we'll confirm the right kit.

Do I need upper control arms for a 3 inch D-MAX lift?

Usually, yes. Lifting the D-MAX's independent front suspension 3 inches reduces caster and pushes the factory ball joints towards the end of their travel. Aftermarket upper control arms correct the caster, which keeps the steering stable, and give the ball joints more room. At 2 inches, most D-MAX setups run well on the factory arms.

Does a lift kit increase