Everest

Select your model:

 Ford    |    EVEREST UA 2015 - 9/2018    |    EVEREST UA2 10/2018 - 2022    |    EVEREST UB (NEXT GEN) 2023 ON |

Ford Everest suspension upgrades at CalOffroad are listed by model. Pick your model from above and see parts matched to your vehicle, from complete 4x4 Ford lift kits through to the individual components that make a lift work properly. 

 

Sort by

21 of 21 items

About our Ford Everest suspension upgrades

The Everest is built on the same underpinnings as the Ranger, with one big difference for suspension: it uses coil springs at the rear, located by a Watt's link, instead of the Ranger's leaf springs. So the front struts and upper control arms often match the Ford Ranger, while the rear springs and shocks are Everest-specific. The UA and UA2 share many front parts with the Ranger PX2 and PX3, and the UB Next Gen with the Ranger PY. Check the fitment notes on each listing.

Most Everest owners are touring families towing a van or carrying a loaded cargo area and roof rack. That's what our range is built around: CalOffroad Nitro Pro shocks and coilovers, Bilstein height-adjustable struts, CalOffroad Platinum raised coil springs and Polyair airbags.

A practical tip: an Everest that sits low at the rear when loaded usually needs heavier-rated rear coils, not just stiffer shocks. Lifts over 50mm usually need engineering approval, so check the rules in your state. Choose your Everest below, or call us on 1300 225 494 for fitment help.

Suspension upgrades for the Ford Everest

  • Lift options: build a 2-inch lift from raised coil springs and matched shocks and struts, or level the front with a strut spacer kit.
  • Shocks and coilovers: CalOffroad Nitro Pro rear shocks and front coilovers, and Bilstein height-adjustable front struts for the UB Next Gen.
  • Upper control arms: restore caster and camber after a front lift.
  • Diff drop kit: brings front CV angles back into range after a lift.

Other Ford Everest parts

Shop by Everest generation

Ford Everest suspension FAQs

Do Ford Ranger suspension parts fit the Everest?

Some front parts do: struts, upper control arms and diff drops are often shared within the same generation. Rear springs and shocks don't, because the Everest uses coils and the Ranger uses leaf springs. Every listing shows its fitment.

What's the best Everest suspension upgrade for towing?

Start with rear coil springs rated for your towball and cargo load, then match the shocks to them. Add airbags if you only tow now and then. Call us with your van weight and we'll suggest a setup.

What about Ford Everest suspension returns? 

The Ford Everest suspention return requests need before and after height measurements from the centre of the wheel to the guard at each corner. Final heights are estimates and change with the load you carry, so check tyre pressures and the weight in the cargo area before contacting us.

Do you install Ford Everest parts?

We don't install Ford Everest parts, but we provide installation instructions and support. Otherwise, use a qualified 4x4 mechanic.

Ford Everest suspension FAQs

Which Ford Everest models do CalOffroad suspension upgrades fit?

CalOffroad provides suspension upgrades for the Everest UA (2015 - 9/2018), Everest UA2 (10/2018 - 2022) and Everest UB Next Gen (2022 on). Select your generation to see only the parts that fit your vehicle.

Do Ford Ranger suspension parts fit the Everest?

Some front parts do: struts, upper control arms and diff drops are often shared with the Ford Ranger of the same generation. Rear springs and shocks don't, because the Everest uses coil springs and the Ranger uses leaf springs. Every listing shows its fitment.

What's the best Everest suspension upgrade for towing?

Start with rear coil springs rated for your towball and cargo load, then match the shocks to them. Add airbags if you only tow now and then. Call us on 1300 225 494 with your van weight and we'll suggest a setup.

What about Ford Everest suspension returns?

All Ford Everest suspension return requests require before and after height measurements from the centre of the wheel to the guard at each corner. Final heights are estimates and change with the load you carry, so check your tyre pressures and the weight in the cargo area before contacting us.

Do you offer installation services for Ford Everest parts?

While CalOffroad doesn't offer direct installation services, we can provide you with comprehensive instructions and support to guide you through the installation process. If you're not comfortable doing the installation yourself, we recommend consulting a qualified mechanic experienced with off-road vehicle modifications.